DRI-EAZ Driforce Air Drying System w/ Driforce Unit
DriForce
Air Drying System
WTRWALL
Force In or Vacuum Out
Direct high-pressure air into wall assemblies and cabinets; or reverse the airflow to draw moist air out of hard-to-reach structural cavities.
Dry Up to 90 Linear Feet
A single DriForce setup can dry up to 90 linear feet of wall; minimizing the number of access holes and equipment needed per job.
38 Inches of Static Pressure
The included DriForce Blower produces up to 38 inches of static pressure while averaging just 3 amps; powerful and efficient on any circuit.
Minimal Disruption
Quarter-inch access holes behind baseboards or kick plates allow interior drying without major demolition or strip-out.
Two Carrying Cases
The complete system fits in two convenient carrying cases; easy to transport and organized for fast setup on site.
Stackable for Storage
Cases are stackable for efficient storage in your vehicle or warehouse between jobs.
| Spec | Detail |
|---|---|
| Part Number | 115991 |
| Volts | 115V |
| Amps | 4.8A |
| Frequency | 60Hz |
| Static Pressure | 38 in. (97 cm) |
| Dimensions | 14 x 14 x 12 in. (36 x 36 x 30 cm) |
| Weight | 97 lbs. (44 kg) complete system |
| Xactimate Code | WTRWALL |
The DriForce system allows crews to dry interior wall cavities, cabinets, and complex assemblies with minimal disruption to the structure. Make small access holes, connect the system, and dry up to 90 linear feet of wall without major demolition. The complete system packs into two stackable carrying cases for efficient transport and storage.