DRI-EAZ Driforce Rescue Mat System
DriForce
Rescue Mat System
WTR WFI
Rescue Mat System only - DriForce Airmover is sold separately.
Hardwood Floor Drying
Draws moisture through the surface of water-damaged hardwood flooring; helping avoid costly replacement and reducing insurance claim costs.
Remove Moist Air or Liquid Water
Use with a high-pressure blower to draw moist air out; or connect to an extractor like the HVE 3000 or a truckmount to remove liquid water directly.
Two Mat Sizes for Any Layout
Large (46 x 30 in.) and small (23 x 30 in.) mats can be mixed and matched to custom fit any floor layout or room configuration.
Fast and Simple Setup
Just one hose connection per mat; the system is designed for quick deployment with minimal setup time on site.
Fully Connected System
T-connectors, connector sleeves, and hose cuffs allow multiple mats to be linked together across large floor areas from a single blower.
Foam Strip Gasket Seal
0.5 in. foam strip gasket creates an airtight seal between the mat and the floor surface; maximizing suction efficiency across the mat.
| Spec | Detail |
|---|---|
| Part Number | 119218 |
| Large Mat Size | 46 x 30 in. (117 x 76 cm) |
| Small Mat Size | 23 x 30 in. (58 x 76 cm) |
| Hose Length | 7 linear ft. per section |
| Kit Weight | 20 lbs. (9.1 kg) |
| Gasket Seal | 0.5 in. foam strip |
| Mat Material | PVC plastic |
| Xactimate Code | WTR WFI |
Lay the mats over water-damaged hardwood, connect the hoses, and draw moisture out through the floor surface using a DriForce Airmover, HVE 3000, or truckmount. Mix large and small mats to cover any floor plan; connect them together with the included T-connectors and sleeves; and use the replacement gasket roll to maintain a solid seal across the full drying area.